luxury link pressure switch ewt 24a
Thank you very much Mr. Roberto for your comment so I can replace it with green emicol who told me it is the same without running any risk of a plate Thank you very much
Mr Roberto would like to see the possibility if you, or someone, can unleash me, I am still going around with the pressure switch of the luxury link ewt 24a.While I replaced it with the green one as you had said and it is perfect, I still have some problems , in the first place (as you said)
the water level varies (high) and I don't know how to regulate it, I started to cut the pressure switch sleeve, then I put a longer inner diameter smaller but longer, then I got another one of the same inner diameter (5mm) and longer than the original etc etc and nothing lowered the level
Another big question I have is that at the LOW level, no matter how much the hose is changed, it is short, long, etc., is it always filled to the same height, at that level filled by TIME?
To complete my few doubts about it I forgot to ask that the pressure switch that I put is an EMICOL, that although it has the same contacts as the one that originally brought (light blue) the contact 33 comes with the pin (male shovel) much shorter than all other contacts which makes it difficult to place the female terminal (fastom)
The length of the hose does not influence. The load is per level, not time. Cut out the tab guard 33.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
