Hi . Replace the bearings and stay well on 902 and replace the bearing. Engine that made noise and now the belt is out I can do it Walk by the turn with the hand and leave

Hi carancho, could you indicate a model? On the other hand check if the pulley of the drum and the motor of the engine were in line, possibly the engine did not remain in its original position, or could have been crossed. Another option may be that the belt has been stretched when working with an oscillation of the drum axis, since as you indicated you replaced them, and now in the normal working position this is not left with good tension.

Thanks friends the problem is that they were not aligned short on the pulley press a little more and the strap was fixed is multivia and not this stretched was perfect thank you very much.