hello good day friends, I tell you what happened my client calls me because his new washing machine does not start the program so I recommended that he claim the guarantee of the same, goes to the guarantee and supposedly they solve it. When moving the washing machine in his van to his home, he pockets the top cover and detaches himself from the washing machine when he arrives at the destination he just notices. Then he calls me again so that I can solve the question is that I turn on the washing machine and turn on all the lights on the platelet, then I begin to start the washing function flashing. bypass the door mic (block door), measure the voltage in the solenoid valve and the 220v does not reach it, and the fault remains the same, that is, it is pressed in the washing function. I would like to know if it has any sensor other than the door micro and if it can be canceled or bypassed, it already controls continuity in the solenoid valves and in the drain pump and they are perfect. I'm going to thank you for your help, greetings igor!

Hello, check the pressure switch terminals if they are properly placed, in the subject of cover with bypassing the microphone, it would be canceled, the other would be but it can be very remote that the ignition microswitch is not sending the order. Regards