lusangor

56.366

hace 5 años

pressure switch and everything that has to do with it

lusangor

56.366

hace 5 años

It is a problem of pressure switch, wiring or board, if you want to bridge the door mic so that it can spin with the door open, if it does. Comment

matiasnm2008

4

hace 5 años

If I bypass the door microphone, it is as if the door is closed, I get an error 5 yes or yes. I already tried that. He had another pressure switch the same and does the same. The contacts are fine.

matiasnm2008

4

hace 5 años

That is, if the door is closed or bypassed the lock marks error 5. The problem is when that happens and I can not use it without that because otherwise it does not spin. I put another pressure switch and the same thing happens.

lusangor

56.366

hace 5 años

as in the post that I sent you at the beginning, replaced plate and solved

lusangor

56.366

hace 5 años

before, make sure the wiring that is not broken from the pressure switch to the board and the connectors on it, that are well

matiasnm2008

4

hace 5 años

With the lid open, load water and cut at the appropriate level.

matiasnm2008

4

hace 5 años

One of the contacts that are plugged into the pressure switch seems to be loosened over time. I gave him pressure to fit well. It's already perfect. Thank you

matiasnm2008

4

hace 5 años

The problem was not solved, it remains the same. If the hero 5 has to do with the pressure switch, why does it only fail when the door is closed?