Hi good day. My name is Alonso and I have an EASY DEA13400PB washer, the problem is that when it comes time to squeeze, it does not, it should be noted that at the time of presenting the fault it smelled of burning and the rinse and dry LEDs were blinking . Check the wash cycle and If washing, but squeeze No, it makes a buzz and the LEDs flash. I started by checking the engine and it works well, check the load sensor (the one below the motor pulley) and it's fine, and finally the relay that releases the wash pulley, and it's fine too. I really don't know what else it could be, that's why I'm asking for help since I'm not a professional in this. Thanks in advance, greetings.

Indeed, the problem was the pump, I changed it and it was running at 100, thanks for the help.