Hi Good afternoon I have an Easy 12 kgs washing machine. change the transmission cover retainer but at the time of testing, it does all its functions but does not throw the water and already check the direct pump and if it works well if you could advise me, since I am not a technician, but I know a little bit about my washing machine Cheers I send you a photo

Check that current reaches the pump and that the door is locked in the spin

if current arrives, because if it is heard that it is working and not locked because it is disassembled and the impeller is free thanks Cheers

[quote:1be5eb8977="JavierAmador"] if current arrives, because if it is heard that it is working and not locked because it is disassembled and the impeller is free thanks greetings [/quote:1be5eb8977] if current comes and does not draw water. Lower the hose and see if it comes out to discard that the drain hose is not blocked

tonga76, if you lower the hose and if the drain hose is free

[quote:d6d514bc19="JavierAmador"] tonga76, if you lower the hose and if the drain hose is free [/quote:d6d514bc19] then change the drain pump. xq with water does not have the strength to turn, but the test alone does work. if tension arrives and the hose is not clogged the problem is the pump

friend you have to change the pump I had an equal job and I measured the amperage of the pump was low so it works but has no force to expel the water

Ronny, I'm going to check with one I have here, thanks Cheers

tonga76, ok, that's what I'm going to do, thank you, then I warn you Cheers

Hi good afternoon to thank the advice provided by tonga76 and ronny adolfo vega If I replace the water pump with a new one and I am already working very well thank you very much Cheers