⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

LIE16585XBB

I have an easy washer model lie16300pbb0 which does not squeeze.

HuGo VzZ

hace 5 años

I HAVE AN EASY MODEL WASHER LIE16300PBB0 WHICH DOES NOT EXPRESS, I BASICALLY TELL YOU WHAT YOU DO, WHEN STARTING THE CYCLE BEGINS TO FILL AND WHEN DETECTING THE LEVEL BEGINS WHEN IT BECOMES IT DOES NOT BLOCK WHEN I BLOCK IT DOWN THAT EXPRESSES ONLY DOES THE SAME BLOCK THE DOOR AND REMAINS WITHOUT MOVING AFTER A FEW MINUTES BEGINS TO BLINK THE LED TO EXPRESS. I HOPE YOU HAVE EXPLAINED ME AND CAN HELP ME. REGARDS.

Comentar

jordani

hace 5 años

Possibly it is a blockage that clogs the drain pump. You have to see all the pipes and clean them after checking that the pump is flowing

Comentar

HuGo VzZ

hace 5 años

in effect jordani the pump is clogged by so much residue that is accumulated, it will be replaced.
Thank you.



Responder



Fermin 007

57.307

hace 5 años



hace 5 años

If it can be the pump that is damaged, or clogged, check it, if it is good, then it can be the swich of the lid is still blocked, to test you can bypass and thus see if it already works, eye, if you are familiar, not bridges, since you can provoke a short, now if the swich is good too, it could be a moored bearing, you could turn the tub and see if it turns easily, greetings

Comentar