⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
UNICOMMAND 116

Drean Unicommand 116 does not turn on or perform any function

Leobt
Leobt
Leobt
2
hace 5 años
hace 5 años
Hi, I have a Drean Unicommand 116 washing machine and from one day to the next without warning it stopped working (it doesn't turn on the light or has any kind of reaction). Check the fuse and it is intact. Also with a pager I checked that there was voltage and both the solenoid valves as well as the ceramic resistance and the platelet diode has voltage. What would be the problem?
Comentar
ROBERTO BERENYI
hace 5 años
hace 5 años
The white rectangular ceramic resistance has probably been burned. If you don't have a tester, plug in the washing machine. In a minute it must be hot.
Comentar
Leobt
Leobt
Leobt
2
hace 5 años

I did what I was told and the resistance stays cold

Responder
luis38
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, remember that the polisher does not work in these cases, it only marks the presence of the positive and is activated with 30 volts. Make the verification suggested by colleague ROBERTO and comment the results. Cheers
Comentar
Leobt
Leobt
Leobt
2
hace 5 años

I did the test that was indicated to me and the ceramic resistance does not take temperature. It stays cold

Responder
luis38
luis38
luis38
95.432
hace 5 años

Dear, if the resistance does not raise temperature, it may be cut. Check with a tester whether or not it has continuity. If it's ok, you must own 6800 ohms. Cheers

Responder
Leobt
Leobt
Leobt
2
hace 5 años

In such a case it is normal that if the resistance is burned there is no reaction in the washing machine. What features should you have when you have to buy it to replace it?

Responder
Leobt
Leobt
Leobt
2
hace 5 años

What resistance should be purchased?

Responder
Leobt
Leobt
Leobt
2
hace 5 años
hace 5 años
Problem solved with resistance change. It was very misleading because although it did not raise temperature it had no flash or a trace of burn but finally it was the problem
Comentar
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
COMPRAR
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
COMPRAR
4.64
(11)

Curso Electrónica para Reparación de Placas
Santiago Cediel
$ 29 USD
$ 11 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis