⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
UNICOMMAND 116

Lavarropa concept unicommand 116 does not turn on

alfidor 5
alfidor 5
195
hace 5 años
hace 5 años
Friends, this washer does not turn on, the fuse is fine. Now, I changed the resistance of 6.8K 10w because it was cut and the 1000ufx25v capacitor. As I did not have 10w I placed a 7w to test if the problem came from there. It turned on but the R of 6.8k warmed up a little. I would like to know if it overheats for being 7w and not 10w and in the case of reheating with a 10w (which I will place when I buy it), what may be the reason.
juan guillermo caceres
hace 5 años
hace 5 años
Hello, this resistance is normal to raise temperature since it works as a trap for the other components of such a basic plate, so it is recommended in these devices to disconnect from the network since this resistance continues to work even off and hence a premature deterioration Of the same. Regards
alfidor 5
alfidor 5
195
hace 5 años

Thank you friend, I am going to put the corresponding R and tell the client to unplug it or put a key cut.

Responder
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, extending the comment of friend Guillermo, the increase in the temperature of the resistance may also be linked to the lower capacity of dissipation. Regards
alfidor 5
alfidor 5
195
hace 5 años

Thanks Luis38

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis