Hello; I have a unicomannd 116 and I stop working programs from 1 to 8 and work on 9 10 and 11. Could you give me access to what could be the problem? Thank you

Once the water inlet solenoid valve is burned, which corresponds to the washing, you must replace the entire coil or solenoid valve and it will work again as long as the plate triac has not burned, which controls the solenoid valve.

Hello, you can perform this test, exchange the terminals of the solenoid valves, both red and yellow and try again in program 1 if the water charge begins, then you would only have to change these since it is a monobody with two solenoid valves. Regards