⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
UNICOMMAND 116

Hi, how are you, drip water from below, washing machine drean unicomma

gegd1989
hace 5 años
hace 5 años
Hi, how are you? The problem you have is that it loses water because of the engine it seems, I am going to take it apart and see what cracks it has or if it is necessary to stick it well so it does not drip. Everything works in the washing machine just has that problem that drips water from below. Thank you.
lusangor
lusangor
56.366
hace 5 años
hace 5 años
Hello, it can be because of the transmission case, if it is there, you will notice the pulley stained as brown, beware of water losses, if it is short, it will damage the plate. Regards
juan guillermo caceres
hace 5 años
hace 5 años
Hello, urgently do not use the equipment until it is repaired under penalty of burning the motor and electronic board in the short term. Verify the loss, if it is for the axis as the colleague contributes, the work to be carried out would be quite a lot since it implies the almost complete disarmament of the machine, to change seals, wheel bearings and possibly also transmission axes. I leave a disarmament tutorial. Regards https://www.youtube.com/watch?v=aoMRCwvW0LQ
gegd1989
hace 5 años

hello I already changed axis, 1 ruleman I am going to change the other one, and the retainer is stuck but I am going to change it anyway it is weird because it looks like a distance from the retainer to the plate or sheet where the ruleman is rare may be there lose it looked brown in that area, I had to change the star because it was attached to the axis.

Responder
juan guillermo caceres
hace 5 años

Friend, as a rule you have to change the seal also to avoid future losses, the space that details is how it comes from the factory, if you want to increase the leak, place grease below the retainer and over the rule, that will give you more protection ruleman Regards

Responder
gegd1989
hace 5 años

Thank you all! Change axle, star, bearings, the hose because it was broken, and the seal did not change because I saw it very well and also did not arrive with the money, thank God no longer loses water, I tried everything and working perfect, for the next one if it fails I will change retains but for now everything perfect, thank you all!

Responder
juan guillermo caceres
hace 5 años

Friend, a job that is not easy and I am successful, I am glad that you have solved, have an excellent day. Regards

Responder
gegd1989
hace 5 años

That's right, Juan!

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis