⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
UNICOMMAND 116

Broken seal lodged in Cuba

Lucas14
Lucas14
422
hace 6 años
hace 6 años
Good colleagues, well the truth is this Unicommand is making me renege more than any other job I've done. I have to change the box, first deny to separate the drum there was no way I had to disassemble from below breaking the plastic couplings to remove the cap and leave only the large shaft and the bowl bearing, remove the seeger washers and hit the shaft from inside the drum until I can separate it. Now I had the problem with the retainer, which did not come out whole but it was all broken and its outer part remained under the hole of the tub, I can not get what is left since it is almost impossible to do it there do not enter tweezers and also It is difficult to make force when the tub is fondonde, what I do not understand is the hollow of the tub since it has like a sheet in the middle like a sheet metal and the seal is housed above and below that lip? I hit the catch to try to get it out and then I found out what that sheet lip was and I sank it a little, I really don't know what to do to be able to solve this, if you can help, I would appreciate it.
luis38
luis38
95.432
hace 6 años
hace 6 años
Dear, to be able to remove the seal, you must remove the flat that is attached to the tank and supports the upper bearing. Then, pushing slightly, the catch is removed down. Regards
Lucas14
Lucas14
422
hace 6 años

Thank you very much teacher Luis was about to enter despair haha now I do greetings!

Responder
Laurabella
hace 6 años
hace 6 años
Hi good day. I went on to comment on my problem. I have a washing machine that drains unicomand that when I connect it it starts to make a noise in the drain pump ... as if it came into contact ... then when the wash cycle comes to rest it turns off and when it starts washing again begins to sound again ... the other problem I have is that when I start to wash after a few seconds it starts to make some grinding and I have to unplug it because the noise it makes is very loud. I don't know what it will be if they could help me ..! ??? I can't attach video I try and it doesn't load it
Lucas14
Lucas14
422
hace 6 años

Laura so we can help you, you have to ask for help in a new consultation, regards

Responder
Laurabella
hace 6 años

Yes, I already did it recently ..

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis