I have a problem with a washing machine drean concept unicomand 116. I changed plate because I tested the parts separately and they had normal operation. Only the pump didn't work. I made the mistake of not changing door block together with plate. I sent the plate to repair and changed the door block. And the manufacturer tells me that it was a triac by short door block. I put it back (with new door block) and load but the pump doesn't even work now, in program 10 (drain) , and before the repair of the plate and with the other old door block at least that if it worked. Please help.

Hello possibly continue with problems on the board Read this forum post where there is enough information https://yoreparo.com/electrodomesticos/lavadoras/drean/unicommand-116/preguntas/919832/lavarropas-drean-concept-unicommand-116-no-desagota-el-agua Regards

Dear, in addition to the door blocker, you should change the thermo actuator, which are the cause of the problem. If you put it in program 11 and it does not drain or block the door, you are having badge problems. Regards