And this is the new bearing:
I never changed it so I need help how to do it, the whole procedure.
Thank you very much and a big hug!
Good 2019!
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Drean
Drean family 086A rear pulley shift
hace 6 años
hace 6 años
Good morning guys! I broke the belt and as I bought it new and I also have the bearing of the new pulley I thought about changing it. What I don't know is if it is needed or when to change it.
This is the current view of the back of my Drean Family 086A:
And this is the new bearing:
I never changed it so I need help how to do it, the whole procedure.
Thank you very much and a big hug!
Good 2019!
And this is the new bearing:
I never changed it so I need help how to do it, the whole procedure.
Thank you very much and a big hug!
Good 2019!
25.004
hace 6 años
The bushing comes out by unscrewing the plastic nut from inside the drum. Use a girl grinder wrench. From outside, remove nut, pulley and bushing lock. Be careful with the pulley, it is fragile.
23.662
hace 6 años
hace 6 años
Friend, change the complete game, these elements do not bring wheel bearings and the wear is more noticeable, as they give you the steps to follow. My contribution would be to disassemble the washing machine to work better. To do this observe on the sides of the pvc cabinet, hidden by a flap there are two locks on each side. Drestabelas and the washing machine will open in two, that way you will have more accessibility to the removal of the pulley and change of the bushing. Regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad