⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Drean

Lavarropas drean gold blue 12.8 mamarca error 5

Lavarropas Drean 12 ks

Lavarropas Drean 12 ks

logotipo62
hace 6 años
hace 6 años
Good afternoon everyone: I have a washing machine drean gold blue 12.8 top load that marks error 5. That error is door. Take out the double door probes with 220v direct and it works. I put the washing machine into operation and before starting it, I started in the contacts of the door block and there are 220v. The issue is that when I connect the terminals the voltage drops to 0 without starting the washing machine. If I start, mark error 5. I do not understand what may be happening since there is correct tension in the terminals but when connecting the block, it falls. Just in case I put another new blocapuerta and it does the same. I would appreciate some comments from you who are very experienced. From already thank you very much
logotipo62
hace 6 años

Hi, thanks for your response. The drain pump, the pressure switch and the water solenoid valve test them individually and work ok. Can it be a platelet problem?

Responder
dataelectronica
hace 6 años

If I try the other. There is no other than the platelet.

Responder
logotipo62
hace 6 años

Thank you very much for your comments. Should I send the plate to repair or put a new one ?. I ask why I don't know if the plate repairs are effective.

Responder
dataelectronica
hace 6 años

It is always much cheaper, if you can, repair it. But not all have repair. Regards

Responder
dataelectronica
hace 6 años
hace 6 años
Hello that happens because it is not a real tension. That is why the door block does not work. Check the wiring from the board. If the wiring is ok. Check the other peripherals to confirm that the fault is the platelet. Regards

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis