good evening dear gentlemen of this place who have helped me a lot of times, thank you in advance I put this photo because where it is lit on the plate there burned, I was recommended to change the thermo actuator where that element is, Or can it be something else?
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Drean
good evening dear gentlemen of this place who have helped me a lot of times, thank you in advance I put this photo because where it is lit on the plate there burned, I was recommended to change the thermo actuator where that element is, Or can it be something else?
drean electronic 156 burned the board
18
hace 6 años
hace 6 años
good evening dear gentlemen of this place who have helped me a lot of times, thank you in advance I put this photo because where it is lit on the plate there burned, I was recommended to change the thermo actuator where that element is, Or can it be something else?
18
hace 6 años
I forgot to tell you that the washing machine locked the door and the water pump was running, and pressing any button did not change if I disconnected it, it would turn off and if I plugged it in, the water would come in and out, because the drain pump was running and the inlet water pump, the plate burned a lot of components must have done a lot of temperature is irreparable
25.004
hace 6 años
hace 6 años
You can try changing the triac Q3. That handles the block, thermo actuator and pump. Generally the thermo actuator damages the plate.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad