I have a washing machine Drean Gold 600 top load old model, I do not have much more data but it has the soap dispenser on the cabinet and the commands are two selector keys that turn it one activates the programs and the other is of separate temperature has two buttons (oval layers) that are for the exclusion of centrifugation and water level. The problem is (supposedly) the door blocker since the washing machine did not start or turn on the pilot light, take out the door block and to confirm bypass the cables (L and C) it turns out that the pilot light came on but it never started, start testing and it does not arrive current (220) neither to the pump nor to the electro. I picked up the door block and connected it and it works correctly, that is to say, it locks the door but in the same way it only turns on the pilot light and does not start and obviously still does not reach the electrode, or pump. The few electrical circuits that I could get all include two solenoid valves and this one has only one and I don't know if the connections will be the same. If someone is clearer that another problem may have it, I would appreciate it infinitely