Hello friends !! I have a washing machine drean 8.12 to which the customer changed the drain pump because it did not work according to him. But after that, the washing machine continued without draining or washing. He called me, I went and I changed the pressure switch that didn't work, so the washing machine started to wash, but it doesn't drain and therefore doesn't spin. I already tested the pump, the solenoid valves, the pressure switch is new, the door block works, the cables from the platelet to the pump have continuity, but it is "hung" there and does not throw me any errors. They could be the carbons of the engine, but as I said it works to wash, and must first drain. I would really appreciate if you can guide me

A Blue does not wash, nor does it start if the pump is not connected, or is burned, or its triac is damaged. I would give error 7 input. If it stops, but does not give an error, it is caused by a partially short motor.

The most likely thing is that it is a platelet error if you can identify the triac that controls the drain pump would be great and if you know how to change it much better .. Luck