⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Fuzzy Logic Tech

Drean concep fuzzy does not lock the door or release heat actuator

tonga76
tonga76
981
hace 5 años
hace 5 años
20190805_215151.jpg [5.59MB] Change this triac in a washing machine drean concep fuzzy since it was flown and did nothing in the centrifuge (the block, the pump or the heat actuator did not act). Change the triac and block and stay the same. Only now the turbine turns in the centrifuge and ends the program (before no, it was wrong) I am not an electronic technician but these platelets usually repair them with other platelets that no longer work. My question is if that triac was from the block or else what is
gallorojocapacitor
hace 5 años
hace 5 años
The triac Q3 is the one that drives, pump, heat actuator and block, remember to also change the block and the heat actuator
tonga76
tonga76
981
hace 5 años

Thanks rooster. Tomorrow I change the Q3 then too. The Q4 was only flown and the Q3 is not flown. I am not an electronic technician, but I usually change the triac or some flown component that does not require much knowledge

Responder
gallorojocapacitor
hace 5 años

Verify that you are commanding Q4, orient the top leg with the wide leg, towards which connector it goes, and which cable goes there, something is short

Responder
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, remember that in addition to the triac, you must replace the resistors associated with the triac Gate electrode. regards
eduardo1968
hace 5 años
hace 5 años
good day tonga76, excuse me I'm commenting and I don't know where you can get surface mounted triac to buy
tonga76
tonga76
981
hace 5 años

Hi Eduardo. I have other damaged platelets of the same model and I replace them

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis