Thanks for the help ... if you press the power button the 220 do NOT come out what could it be ..? Would you have to change the terminals of the power button? In addition it has the light with 2 white wires that come down. If this light would be burned influences the process of operation?
If it does not come out it is because the button is internally damaged, you can directly connect the terminals by skipping the button, I joined the cables 3 with 1 and 2 with 4, this is to test if the machine works, it is advisable to replace the button, the lamp although Burned does not influence the operation of the washing machine, greetings.
On the inner side of the power button there are 4 terminals 2 with red wire and 2 with light blue wire. .. What you are suggesting is that I disconnect and a red with red and light blue with blue ..? I don't know how to attach the photo ...
There I modified the question and attached a photo ... I don't know if it was uploaded to me
If so, check that the cables are screen printed, they show the numbers 1, 2, 3 and 4 greetings.
AlturasbaL. .. well ... I did what you told me ... the power button on the part of the terminals of the line .. (The 2 red wires) are broken ... I made the bridge and it works ... tomorrow I buy the replacement. I thank you very much ... in this place since the 1st problem that was a star change of this washing machine always for people like you I could fix it ... and you were the only one who helped this problem ... thank you very much ... good Estimated week
I am glad for the results, if I was the only one, it must be for the respect of the other colleagues who, seeing that the contribution is the solution, do not interfere so as not to confuse the consultant, greetings.