⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Excellent 6.06 Blue G
The lights flicker
94
hace 5 años
hace 5 años
Hello friends I have a problem with the Drean BLU 6.06 p I put any program and the three lights flash continuously if I pause and without pressing start I already checked the pump the solenoid valve the resistance everything and I did not find failures I brought the board I tried it alone directly and it does same what can be the problem of it since I can repair it if they give me a hand will be very helpful if I will not have to buy another.
23.662
hace 5 años
hace 5 años
Hello, do I control the energy entering the home? if it is below 180 or over 240 volt the behavior would be that, otherwise the micro of the same would have problems. regards
94
hace 5 años
I tried the power supply and it is fine 230v so sure is the micro now another question if I put the micro of another board is good?
23.662
hace 5 años
Ami understand it would be a hard work and with uncertain results that as you will see the welds are so close that you have to be handicapped in it, apart from that it would have to be of the same platelet model. regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad