⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Excellent 6.06 Blue G

Problem washing machine drean excellent 6kg

exee_17
hace 5 años
hace 5 años
Good, the washing machine correctly loads the water, cuts the pressure switch to level, rotates the drum 3 times activates the pressure switch again and stops. It does not make mistakes but it remains without doing anything. Change pressure switch, check the hose, change the water valve, check the engine and keep doing the same. All I have left is to change the plate which has no spots or signs of deterioration.
Comentar
tonga76
tonga76
tonga76
981
hace 5 años
hace 5 años
Do you finish the program? Try to spin and see if the motor rotates for both sides. If the program ends is xq a carbon must be worn and it does not throw error sometimes
Comentar
exee_17
hace 5 años

No, as you explain, you start it, it starts to charge the water in a normal way, it reaches the level, it turns 3 times the short pressure switch makes noise and does nothing, it is checked. It would have to reload water and turn again to continue washing but does nothing or emits an alarm.

Responder
tonga76
tonga76
tonga76
981
hace 5 años

Check that 220 reaches 2 electrovalves. You may load water for the soap, but not for the fabric softener.

Responder
exee_17
hace 5 años

The electrovalvula the probe in another washing machine and it worked correctly.

Responder
tonga76
tonga76
tonga76
981
hace 5 años

But check that 220 arrives from the platelet to the solenoid valve connectors

Responder
ROBERTO BERENYI
hace 5 años
hace 5 años
I share the diagnosis of Tonga. It seems to have problems with carbon, or motor induced.
Comentar
exee_17
hace 5 años

I tested the engine in another washing machine and it worked perfect until centrifugal

Responder
ROBERTO BERENYI
hace 5 años

There are engines that work in a washing machine, and not in another. And vice versa.

Responder
alturasbal
alturasbal
alturasbal
27.174
hace 5 años
hace 5 años
Hello, if the engine works on another machine check the plate relays, regards.
Comentar
ROBERTO BERENYI
hace 5 años

What I could not understand yet, is why an engine, which does not work in a washing machine, does it in another. And if you put the other engine to the first, it also works. That is, the two washing machines work, if the motors are exchanged. That has happened to me four times.

Responder
exee_17
hace 5 años
hace 5 años
Good morning the solution was to change the plate and ask the electric service company to change phase since there was low voltage at home and when placing the new plate issued that error. Thank you all for your contributions.
Comentar
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad
Maximiliano Resch
$ 60 USD
$ 20 USD
COMPRAR
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
COMPRAR
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis