⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Excellent 6.06 Blue G

Patriot washing machine plate problem

claudio36
hace 5 años
hace 5 años
Hello people from the community, good afternoon here in Argentina, I need if someone can give me a hand with this to platelet, a triac and an smd resistor were burned which I can't see its value, someone can tell me what it is, wish now thank you. I leave photo of the plate, the resistance is R36
ROBERTO BERENYI
hace 5 años
hace 5 años
R 36 is a 331, R 22 is a 103.
claudio36
hace 5 años

Hi Roberto, thank you for answering, r22 take me out for another board, but r36 and triac Q1 were flown and I didn't know if the value of r36 was 301 or 331, thanks Roberto. A doubt Roberto the Q1 handles the door blocker ???

Responder
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, comment if the plate is original or alternative, as the components differ in both. Normally the triacs are all the same, except for the engine. Regards
claudio36
hace 5 años

Hi Luis, good morning, it's the original

Responder
gallorojocapacitor
hace 5 años
hace 5 años
R36 is 330 ohms = 331
claudio36
hace 5 años

Thanks red rooster, greetings

Responder
claudio36
hace 5 años
hace 5 años
People thank you for answering all, very grateful for each contribution, I tell you, change the transistor for a zo607, the one I had burned was a ft01 MN, and I placed both common resistances because smd I don't get around my area, cheese working if problems until the moment, they had been burned by a false contact in one of the terminals of connection to the board, apparently only that, from already thank you very much again to all greetings
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis