⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Excellent 6.06 Blue G

charges water but does not start washing

sergio.018

hace 5 años

the washing machine loads water well and when it has to start rotating the drum the lights flash 7 times and there it is. If someone guides me what can it be? , Thank you

Comentar

ratonelect63

5.308

hace 5 años

motor guiding sensor



Responder

alturasbal

27.174

hace 5 años

Hello, the error refers to overfilling, it controls if the drum rotates at spin speed, if so it controls the state of the engine tachometer, he says, greetings.

Comentar

sergio.018

hace 5 años

centrifuge very well, won't it be the persostat?



Responder

alturasbal

27.174

hace 5 años

After loading the water you loaded empty?
If not empty, control the drain pump, its wiring and connectors, greetings.



Responder

sergio.018

hace 5 años

I say it does not let the wash activate



Responder

alturasbal

27.174

hace 5 años

When marking error 7 you must activate the drain pump, does this happen or not? Comment, regards.



Responder



luis38

95.432

hace 5 años



hace 5 años

Dear, check pump, pressure switch and connectors that are not sulfated. Regards

Comentar

sergio.018

hace 5 años

but the persostat might not activate the wash right?



Responder

luis38

95.432

hace 5 años

Dear, if the pressure switch is defective and remains at the "high" level, this error is activated and the pump must act.
If the pressure switch is fine, but there is tension in the pump, before starting it, it is a plate problem. Regards



Responder