Hi good day. After selecting the washing program and switching on, the washing machine loads water normally. When washing, double click on the pressure switch and there it stays. and there it stays. Bring the door block, 1-2 in my case and load water and just that. Also disconnect the ground wire from the motor and do nothing either. Please if anyone can help me, thanks.

Dear, check if it gives you any error code on the display or leds of special functions. Remember, in these machines you cannot bypass the door blocker, because the plate takes it as an error. On the other hand, the bridge is in positions 2 and 3, generally. Regards

Hello, disassemble the carbons from the engine and check that they are not worn. To be sure, you have to disassemble them. Regards