⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Excellent 6.06 Blue G

Drean blue 6.06g

gusguer65
hace 6 años
hace 6 años
Good morning, YoReparo friends. I have the problem that a drean exelent blue 6.06g loads water to the proper level and as soon as it ends the drain pump is activated and does not wash, the engine is spinning well. Can somebody help me? From already thank you very much!
alturasbal
alturasbal
27.174
hace 6 años
hace 6 años
Hello, comment if you accuse any error through the flashing of the LEDs, greetings.
juan guillermo caceres
hace 6 años
hace 6 años
Hello, check the water inlet filter that is free of sediment, this washing machine has a limited water load time, if it is exceeded at the end of the load, it expels it. Indicate if the control panel throws the error, if so, count the times it does BETWEEN pauses to help you better. Regards
gusguer65
hace 6 años

Thank you, it was very useful.

Responder
juan guillermo caceres
hace 6 años

I'm glad you solved it. Have a great rest day
Regards

Responder
gusguer65
hace 6 años

Good morning Juan Guiller. It happened to me that the problem was solved with his help, but he did it again and blinked 2 times and I changed the loading valve and does the same. Could you tell me what the problem may be? Thank you

Responder
juan guillermo caceres
hace 6 años

Check the flow of water that is fluid, if it is too little it will exceed the time you have specified on the board and throw error, in case this is well control wiring and especially connectors thereof, both side plate and solenoid valve side , remove them and see what results you get. Regards

Responder
gusguer65
hace 6 años

Thanks, I solved it and it was a little soap ball that intermittently got into the pressure switch hose. Thank you

Responder
juan guillermo caceres
hace 6 años

Good for you, friend, I'm glad you solved it and thanks for sharing the problem, it helps us to further expand the knowledge of failures of these equipment. Have an excellent weekend. Regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis