⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Excellent 6.06 Blue G

Drean 6.06 strange fault

Bonham12
hace 6 años
hace 6 años
Good, I tell you, I put any washing program and after loading water into the drum, it starts spinning at maximum revolution as if it was spinning, I imagine a platelet problem, has anyone happened? can you help me? Thank you
Comentar
Bonham12
hace 6 años

The coals are in good condition, 3 centimeters approx. I want to add that I tried it with a drean 8.12 plate (if I'm not mistaken) that I had turning and the engine in the test mode works fine but does not spin, that is, it turns with the revolutions according to the washing.

Responder
Bonham12
hace 6 años

The tachometer works well ...

Responder
ROBERTO BERENYI
hace 6 años
hace 6 años
Quite common that fault. The engine speed sensor does not work (it does not give alternating current when it rotates), or the motor coals are very worn out.
Comentar
Bonham12
hace 6 años

Thanks for responding, if it is the speed sensor, is it "repairable"? Now I take out the engine and check the coals.

Responder
Bonham12
hace 6 años

Although it was not the speed sensor that did not work, it was what guided me to the solution since I followed the wiring of the sensor to the board and there I discovered a track cut just coming from the sensor, although it did not look bad been measuring with the multimeter it had no continuity towards a resistance in the plate. Thank you!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad
Maximiliano Resch
$ 60 USD
$ 20 USD
COMPRAR
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
COMPRAR
4.64
(11)

Curso Electrónica para Reparación de Placas
Santiago Cediel
$ 29 USD
$ 11 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis