⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Drean Concept 5.05

damaged component Drean fuzzy logic tech v1 with display

Dante Dankeurivan
hace 5 años
hace 5 años
Hi, how are you? I have a problem with a washing machine ....... I burn this component twice. the issue is to change everything now .... replace the engine pump and thermo actuator with new ones (when you buy another washer used but in good condition) and I don't know why, but the first plate (which I already had) that component was burned, then I got a new plate by replacing the thermostat and the pump ... it burns ... I get another one that I use A few minutes ago and still burning! help please .... I also need to know how I can search in Argentina for mercadolibre the model of that component to repair the 2 lost plates. please help.
Comentar
EVELIO RIOS H
hace 5 años

Dante mounts some photos and the model at least.

Responder
EVELIO RIOS H
hace 5 años

Dante follows the clues of the bad component, at least two must reach the main connector (right side) identifies the input and output. The output takes you to the element that triggers, what is it?

Responder
EVELIO RIOS H
hace 5 años

Friend, the washing machine must have an electrical diagram on the back, take a picture.

Responder
EVELIO RIOS H
hace 5 años

Dante can test the elements independently to find the one with the fault.

Responder
lusangor
lusangor
lusangor
56.366
hace 5 años
hace 5 años
Hi That triac commands the hot water solenoid valve, also controls the resistance associated with that triac Luck
Comentar
Dante Dankeurivan
hace 5 años

Do you know that when the drain starts there is when that triac is burned as soon as it starts and the second one is damaged, the pump and the engine is new .... could it be the blockhouse?

Responder
lusangor
lusangor
lusangor
56.366
hace 5 años

Excuse me, I am wrong in the answer that I have given you, that triac, belongs to the blocapuertas, termoactuador and bomb, as the colleague alturasbal indicates, greetings

Responder
luis38
luis38
luis38
95.432
hace 5 años
hace 5 años
Dear, all triacs, except those of the engine are the same. Normally it is the FT0107. Remember to replace it also to control the resistors associated with the "Gate" electrode. regards
Comentar
Dante Dankeurivan
hace 5 años

Do you know that when the drain starts there is when that triac is burned as soon as it starts and the second one is damaged, the pump and the engine is new .... could it be the blockhouse?

Responder
luis38
luis38
luis38
95.432
hace 5 años

Dear, as that triac controls pump, door blocker and heat actuator, if any of these peripherals is defective, it can damage it. regards

Responder
alturasbal
alturasbal
alturasbal
27.174
hace 5 años
hace 5 años
Hello, that triac feeds the pump, the door and thermo actuator, one of the 3 is short and burns, replaces the components and retests, greetings.
Comentar

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
COMPRAR
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
COMPRAR
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis