⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Drean Concept 5.05

drean washing machine (platelet)

furchi
furchi
6
hace 6 años
hace 6 años
Good afternoon, they told me (Luis 38) that you can put a drean plate comcept unicomando (it is the one that has dial, that is not digital) in a 5.05 without display, but the chips are different my question is if I cut the wires and change the chips I have to follow the order in which the wires are or change something from Thank you very much (if possible, mark an outline)
luis38
luis38
95.432
hace 6 años
hace 6 años
Dear, on 5-05 you can go any of the electronic Concept boards, (Unicommand, CDA and Fuzzy Logic). You just have to adapt the connector. Regards
furchi
furchi
6
hace 6 años

thanks Luis 38 I know that they are compatible, but I want to know if changing the connector (tab) the order of the cables is the same or you have to change something, because to test I will cut and join the cables, I mean I want to know if one or the other the pins is the same, if you have any photo or scheme I appreciate it.

Responder
luis38
luis38
95.432
hace 6 años

Dear, you don't have to cut or change any chips. Now I pass a photo to see the subject. Regards

Responder
furchi
furchi
6
hace 6 años

Thank you very much Luis in the week I try it, very useful your information.

Responder
furchi
furchi
6
hace 6 años

hi luis38 the chips are not compatible with the unicomando and 5.05 one has 11 pins and the other 14 pins and different size so my question to exchange tab if I can tomorrow I upload photo of the two

Responder
luis38
luis38
95.432
hace 6 años

Dear, there are only two types of connectors. Old models with 12 terminals and new models with 14 pins. There is an adapter card that can exchange both plate models. Regards

Responder
furchi
furchi
6
hace 6 años

Hi Luis 38 These are the platelets I have, I think they are not compatible

Responder
furchi
furchi
6
hace 6 años
hace 6 años
[img] https://scontent.faep8-1.fna.fbcdn.net/v/t1.15752-9/62036751_680511995753785_344254337582628864_n.jpg?_nc_cat=110&_nc_ht=scontent.faep8-1.fna&oh=a571eb3f3e06db3db3db3db3db3db3db3db3db3db3db3db3db3d5
luis38
luis38
95.432
hace 6 años

Dear, in this case the adapter card does not work because it is used when the wiring connectors are 12 terminals and 14 pins respectively. Anyway I look for an adapter that I use in these cases and I take a picture. Regards

Responder
furchi
furchi
6
hace 6 años

ok thank you, as you will see one has 10 pins and the other 14 but I think that in 14 some are not connected, greetings

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis