´Hello friends of I re stopped good day I am having a problem with a drean that is driving me crazy ... the question is that they brought it to me a few months ago because I was not walking I found one of the 3 cables that take him to the engine cut I joined him and tried it in the workshop and walked perfect and delivered it ... the next day the client called me that he was not doing the same thing ... I went to look for him again and the problem was that he was carrying water, washing but When I was going to spin in the rinse, I used to spin a few laps and it went out ..... I ended up changing a triak to the plate of some amperages, I tested it and walked well and handed it back to the customer ... he says I use a few weeks and then I start doing the same thing .... I went to look for it again and I have it in the workshop I put the new plate the new block truck check pump check the impeller that does the spinning and check the consumption of the engine that said incidentally consumes an amper for one side and for the other consumes 0.9am .... and continues to do the same when it goes to spin spin a few laps and goes out is driving me crazy can you please help me that the customer needs it .... THANK YOU BOYS

Hello, check or if you can change the wiring that goes down to the motor, it may be that it has overheating problems and opens at the start of centrifugation, taking into account the present of the first problem. Regards