hello friends good morning I have a drean concept 5.05 washing machine that hits the centrifuge
I want to change the rods with the spring when taking out the old rods do not look how they were hooked I left a two photos to see how they go 
https://cdn2.yoreparo.com/uploads/imagen_post/0003/55/0780266fe779a912b0fbb91cfedad26f87a9de37.jpeg" alt="" />
I changed the four rods and still hitting when centrifuging what is to take out the top cover and does not hit the sides moves
a little bit just but it doesn't hit
Hi Isidro, for you to receive the help you need you have to open a new question, here we are dealing with another issue that does not relate to your query, you have also proposed it as a solution to the Charly2015 problem, greetings.
Hi, I put it like that, but so that it doesn't hit, I have to lift the top cover, I'm going to send you a photo
I have already seen several with that problem and after changing the supports for new ones the problem continues, I think it is a problem of model design, although in similar ones of the same brand this does not happen (unicommnad, 206, 156, etc. ), the truth is that I don't know what happens that they shake so much, at certain rpm the tank plays on the sides of the cabinet.
check a couple of things but the ring has water when moving the tank.
if under the back the one in the photo plays on the drum and shakes everywhere
if I did not put used brackets they are in a washing machine that I have of spare parts is of a drean but ne is the same brand but they are the same
if the rods were longer and the cuba would lower a little more, it would not touch
It is my opinion that you designed
The ring, which you call it, is a hydro balancing ring, its function is to keep the tank balanced during the washing process, for no reason it must be emptied since the liquid inside is not water and the amount it carries is of a measure determined greetings.
If you lengthen the rods, the problem is that the pulley can touch the floor when the washing machine has a full load, you should try to see what happens.
