⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Concept 5.05

Dream CDA washing machine

Lola Velazquez
hace 6 años
hace 6 años
Good afternoon, I have a Dream CDA washing machine, the washing machine loads but the water passes by, it is like it never fills, and then for a while it is like throwing a fault and the board flashes, when looking down I see a cable GREEN loose, in turn I deduce that there is the problem, the query is, that cable is ground ???? because it comes just to a kind of terminal with two little screws, I do not want to join it without a second opinion, thank you very much great greetings! JOSE LUIS
alturasbal
alturasbal
27.174
hace 6 años
hace 6 años
Hello, the green wire is the grounding discharge and the terminal you see is screwed on some metal surface, in case of a failure in any component the current will go through that wire and will break the circuit breaker, as long as your electrical installation has Discharge to ground, now the problem of filling and emptying at the same time may be because the drain hose is too low or dropped or due to plate problems, if the drain is done with the drain pump running the problem is the plate , review these items and comment, greetings.
dataelectronica
hace 6 años

Hello a small sum, to the comment
The circuit breaker It will work the same for as long as the house is not grounded since it works because of potential difference. Regards

Responder
Lola Velazquez
hace 6 años

Great !!!!! Now I try, and yes, the discharge hose is down !!!!! I try and tell you !!! thank you!!! hug!!!

Responder
dataelectronica
hace 6 años
hace 6 años
Hi first, raise the discharge hose a little. And if you have added hose, remove it. Regards
Lola Velazquez
hace 6 años

FRIENDS apparently it is filling well, a simple matter and even obvious the position of the hose, now it is doing the process I hope you are all well! THANK YOU AGAIN !!!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis