⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Concept 5.05

DREAM 5.05v1 does not centrifuge

ricardovilla55
hace 6 años
hace 6 años
Friends, good afternoon. I have a dream 5.05v1 washing machine, which I stop centrifuging, by logic 1st, check the door blocker, it was bad, replace it with a new one, provide it before placing it and it worked well. I started it and followed the problem, Check the thermo actuator. It also works correctly. check water pump, motor did not find anything irregular and the correct consumption capacitor good. within 5% tolerance. follow the problem change plate, and check electrical installation .. there are no wires cut or short in short I found no failures of any kind or components or installation. BUT STILL WITHOUT CENTRIFUGING. ONLY DOES THE WASHING PROCESS EMPTY THE WATER AND DOES NOT CONTINUE WITH THE RINSE OR THE CENTRIFUGAL. ..- THANKS AND I WANT TO WAIT FOR ADVICE.
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hello You comment that it does not pass to the rinse, check if it is one of the solenoid valves that does not work or does not reach voltage, which belongs to the rinse Regards
ricardovilla55
hace 6 años

IF YOU CHANGE THE RINSE ELECTROVALVULA NOW DO THE FUNCTION AND CENTRIFY THANK YOU lusangor PROBLEM SOLVED .. SALUDOS

Responder
lusangor
lusangor
56.366
hace 6 años

Regards

Responder
juan guillermo caceres
hace 6 años
hace 6 años
Hello, it would not be the first time that a door blocker works but does not enable centrifugation (the quality leaves a lot to tell), to make sure to bridge the black and red or BP2 and BP3 terminals and try again in "centrifuged" mode see if it does . Regards
ricardovilla55
hace 6 años

thanks friend solved, leave the bridge closed

Responder
juan guillermo caceres
hace 6 años

Hi, I'm glad you solved it. Regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis