⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Candy

Candy Smart C2 085 .5 Bridges Blocapuerta

TOTALSERVIS
hace 6 años
hace 6 años
Hi everyone, I have a candy smart washing machine c2 085-5 and I would like to bypass the door block ... to get me out of doubt ..x the technician told me it was the plate ,,, for me it is the door block by such reason does nothing or feeds the carca valves ,,,, thanks
lusangor
lusangor
56.366
hace 6 años

upload a photo of the door blocker

Responder
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hello, check if the voltage reaches the terminals that reach the door block, if it does not arrive or is incorrect, bad board. Regards
TOTALSERVIS
hace 6 años

yes ... the voltage did not reach the terminal block by bad terminals ... thanks

Responder
lusangor
lusangor
56.366
hace 6 años

Ok, I hope you solved it

Responder
juan guillermo caceres
hace 6 años
hace 6 años
Hello, in these washing machines, the door lock cannot be bridged since the plate detects it as an error. When you start it, a second later you have to listen to a persistent "click" of the door lock, but listen nothing already has a clue where to start investigating. Regards
TOTALSERVIS
hace 6 años

thanks .... it was wrong .. the connection of the door lock .... now i am testing it .... thanks

Responder
TOTALSERVIS
hace 6 años
hace 6 años
hello .. does anyone have the user manual of this model of candy smart c2085.5 ... to be able to program it correctly ... as I bought it used it has no manual ... and I can't find it online ... thanks
escar1
escar1
1
hace 6 años
hace 6 años
Hello, in my case I changed bearings, connected everything, threw a jet of water and stopped. It was flashing the light of the blocapuerta (It is a Candy CYT8610-12 6kg top load). I turned off and on again but it didn't start because it never blocked the door. I removed the door blocker and I measured and it reaches 220v permanently, even with a washing machine in "off". I bought and changed the door blocker, when I connected the "click" was heard as if it activated the resistance but the witness light was again titalando. I tried again and now this blockade was also left. Where do I aim? Does the plate burn it? I don't want to buy another one to burn it again. Any suggestions?
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis