Candy washer does not spin
hello how are you is semi new i don't think it's a problem what you say today i did the test connecting the direct motor and it's strong i don't know if it will be the plate
Hello, these motors when connected directly start at maximum speed since it does not have the electronics of the board that controls it, greetings.
Friend, it is not uncommon for new items to come with failures, I found broken media on new equipment, so it would not be too much to control what was suggested. Regards
In addition, we corroborate or rule out the fault, with assumptions it would be difficult to reach a solution.
but I try the spin without water and without clothes and it turns slowly so I tell you what I think is strange that connecting the direct motor rotates at full speed so I ask you not to spin hard to shake the drum rotates at the washing speed with the board connected
Perfect, I fully understand your point of view, so the control of these elements, because when the tank moves too much, the plate detects it and remains in permanent AB without starting at spin speed until the end of the cycle. Regards
hello I rebi everything and everything is ok what I found on the plate a component looks like a small burnt mustard-colored lentil so I told you that it could not be what you told me since I did not spin at full speed to shake the Cuba so much you have an idea what will it be thanks
Well Friend, on the subject of electronics, I have limitations therefore, ask a moderator to close this post and there will be another with this problem, if possible with image of the plate with problems, so other colleagues can see it more quickly. Regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
