Candy Smart class aa washing machine
candy_caf1810_12.pdf [6.98mb]
New afternoons, I will tell you that it is a Candy Smart 1810 aa, the fault that it does is that I hardly give it the wash function or another function already starts in failure, I tried the bulb and it works, I measured the solenoid valves and they give continuity, I could bypass the pressure switch? So I rule out that?
Check continuity in the wiring of the pump and its connectors on the plate side, then disconnect the pressure switch hose and try to see what happens, he says.
Measure if it gives continuity between pins 11 and 16 of the pressure switch, if it is because it is broken or locked internally.
In the first answer I attached the service and user manual, reaching the end is the list of errors, greetings.
Good morning mate, I am now looking at the washing machine, what I measured was the following, in X10 disconnected the drain pump I found that I have 220 volt and when I connect it I have no voltage, I directly connected the drain pump and it goes. But connecting the voltage drops.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
