Hello people, consult I am with a problem of a candy grand washing machine Evo 1283. It presents error 2. What I had noticed strange when I took the top cover to access the electro valve, the tabs that connect with electro valve were burned. Change the chips, the electro valve works perfect by testing the direct bone manually at 220v. Start the wash, door locked and does not start the process passes a few minutes and error 2 jumps. Water pressure is good. The strange thing that when I plug in the washing machine a lot of noise is heard from a relay that comes from the plate that is located in the lower bone where the phase enters and neutral, the Display works well with the naked eye, the buttons are working well, From now on thank you very much I hope a quick response

The error E2 in other washing machines is that you must change carbons of the engine and then reset the chip. Check the coals are not worn.