⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

T-5516

Hi, I don't know how to use this washing machine. aurora t 5516

Julio Dan

hace 5 años

On the front it has 4 buttons that I don't know what they are for. half erased Then he has two knobs. one calculation is the one of centrifugation that goes from 200 to 1000. another one of temperature that goes from 0 to 90 and another thread that would be a spring cover. but it turns the same clockwise. It makes like a tric tric tric, as if you were giving it a rope. As if it were a timer. and then if you pull out in theory it starts. but I have no idea what I'm choosing in that timer. because it makes tritritri crack tic tic tic crack ... and has no arrows or lights. I don't know what I'm choosing. Someone who knows how to use it. That explain me below has some references but I do not understand anything. also additional data. my door locked the round lid. and I can't open it with anything. capz that press something to start and locked to walk and as I did not know turn it off. please help.

Comentar

Julio Dan

hace 5 años

I don't know how to put the picture. But if they tell me I do. My problem is that everything is half erased. The last knob is the biggest one. the one that is thrown out to start. That has nothing. Now I try to upload it.



Responder

luis38

95.432

hace 5 años

Dear, you can take a photo of the control panel to help you properly. I tell you that the base of the programming knob, (where the numbers or letters are), is replaced and can be changed. regards

Comentar

luis38

95.432

hace 5 años

Dear, there are several posts that teach how to upload images to the site.
Regarding the knobs from right to left, you have the programmer, which is always turned clockwise and pulled to turn on the washing machine. Then the one of the temperature selector that must be at zero and finally, there is the knob that determines the RPM of the centrifuge. Regarding the keys that continue, I don't remember the order. regards



Responder

Julio Dan

hace 5 años

Luis thank you very much. If I saw that in a perfect explanation he did in another post. but the preilla programmer. The lyrics are not good. I think it says G, K and below has some references. but I do not understand anything.
I made him walk today. But the door never opened. I finish "washing" I don't know if I'm left with water inside. But I could not open it. It has the door locked. I thought it was unlocking at the end and wait two or three minutes



Responder

luis38

95.432

hace 5 años

Dear, if the machine works normally, after a few minutes after the end of the program, you must release the door. If you do not, it is possible that the door block is damaged. regards



Responder

Julio Dan

hace 5 años

the door block must be broken. and I don't know if I drain the water from inside today I'm going to trust because I still didn't move there. You have an idea how to open it provisionally. With a card If the hook is inside or outside. to pull?



Responder

luis38

95.432

hace 5 años

Dear, to remove the water inside, remove the filter cover from the pump.
To release the door, remove the top cover and once you locate the latch, push it to the opposite side of the loading mouth to open the door. regards



Responder

lusangor

56.366

hace 5 años

Hello, you can download the manual from this link that I leave. http://www.clubdediagramas.com/archivo/lavarropas-secadoras-a31/aurora-m2108/wordiconexe-f95492.html In this forum link, there is a summary elaborated by a colleague. http://linea-blanca.yoreparo.com/lavadoras_secadoras/solicito-manual-usuario-de-labarropa-aurora-t5516-t909277.html The door lock is necessary for it to start working, after about three minutes of finishing or stopping it, it is unlocked, if you try to open it locked it will break the door lock. regards

Comentar

Julio Dan

hace 5 años

I can't find the download link. I get a file. exe. I dont know. and it tells me that I have to pay to download it. or become a community partner. but nothing. I am not able to do it, I do not receive a confirmation email



Responder



Julio Dan

hace 5 años



hace 5 años

Please I need to know not the meanings of the programs are below on a printed screen on the washing machine. in programmer control. It is a rotating knob, with small selectors inside that you see that you will choose the program. (before throwing the knob out) well, I don't know what to select before throwing because there are no letters or numbers in one, F is divided, but next to something like FoB and I don't know what it is. and has a mark with an off pen. That has to stay up.

Comentar

luis38

95.432

hace 5 años

Dear, as I mentioned earlier, go to a branch shop and buy the 16-program Aurora knob base and solve your problem. regards



Responder

Julio Dan

hace 5 años

Thanks for the answer I wanted to choose your answer as the best but I don't know if I did it right. He never told me that I asked a knob with 16 programs. That's why this seemed the best answer. regards.



Responder