⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Ariston

AVTL 60 brakes during washing with error code

nicurda

hace 5 años

Good day, My AVTL60 washing machine has started to fail as follows: Start a wash cycle normally (water discharge, charge, turn the engine during washing). After a few minutes during washing, the washing machine stops and turns on the following lights: DOOR LOCK LED flashes fast LED 3 of the right column (image of a clock, above the spin LED) flashes All others are turned off. In the manuals I consult, I don't find an error for that LED only. Thank you!

Comentar

alturasbal

27.174

hace 5 años

Hello, the error refers to stuck, locked motor, to problems on the control board in the part that drives the motor or wiring problems, check this and comment on the results, greetings.

Comentar

nicurda

hace 5 años

Thanks for the tip, alturasbal.
From what you mention I tend to the problems on the control board since the engine is running well and I have not encountered problems with the wiring.
When removing the control board I noticed a capacitor a little swollen ... Maybe it comes from that side.
I try and I tell you.



Responder



lobaiza marcos

504

hace 5 años



hace 5 años

Hi. Is it a 680 mf capacitor? Put 820mf or 1000mf and change the other two next. Regards

Comentar

nicurda

hace 5 años

Hi marcos,
Yes, the one that looks worse is 680 mf.
Of those who follow him, there is one of 470 mf that looks pretty swollen too.
I'm going to see if I get them and if I don't replace the 680 with a bigger one.
Thank you!



Responder

nicurda

hace 5 años

Thanks for the tip, Marcos. I put a capacitor of 1000 mF instead of 680 and changed the 470 step. The washing machine went back perfectly Regards Nicolas

Comentar