⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Ariston

How to fix Ariston Aml101 NTC probe failure

Richard1818

hace 6 años

Hi .. I have a lav. Ariston Aml101, marks me fail F03 referred to the sonsa ntc in short. I removed the ntc probe and it marked me 1kohm then I placed another one that I had from another ariston for scrapping whose average probe 17 kohm but still marking me the error and now I left the two ntc probes marking 1 .. continuity arrives at the platelet the probe cables, that seems to be in order. that the probe may shorten or can be canceled in some way

Comentar



lusangor

56.366

hace 6 años



hace 6 años

Hello You have to put the original ntc (recommended) or put one of the same K as the original, you can not put any, or bypass, or cancel. If the scrapping one, it measures you now 1K, it doesn't work, you have to look for another one, I think they are 20K Regards

Comentar

Richard1818

hace 6 años

Hi capo .. The ntc I got was exactly the same, it was from another original ariston.
Before I put the ntc that got the measure and was in 18 k. And after I put it in the washing machine the fault followed me, I removed the ntc and now I average 1k.
I heated it with a lighter and now it measures 18k again.
That's why I don't know what the problem might be, maybe the board doesn't recognize it



Responder

lusangor

56.366

hace 6 años

You have to measure it at a temperature of 25º and it will give you the original K. If it stayed in 1K, without varying until you gave it heat, it's wrong



Responder