nicolaslk2015

5

hace 5 años

Sorry but I don't understand, how would it be? From the Ecosol there are two cables that are the ones that go to the socket. How many which wires should I connect to the thermostat?

Calemdq

23.097

hace 5 años

If you follow the thermostat circuit it is clear and simple, or it can be an outlet where you plug the panel

nicolaslk2015

5

hace 5 años

How lucky you are so clear, haha. I understand what you tell me about U, but I can't understand you at all. I have an outlet, and the plug of the ecosol. It is necessary to know if the thermostat enters 1 or 2 power cables (and what pins they are), and which are the output ones to feed the ecosol. I understand to form a socket should be 2 wires, so I do not get to understand about U.
Sorry if I sound very awkward, if you could clarify what cable to connect on each pin I would really appreciate it!

Calemdq

23.097

hace 5 años

The phase or live is connected to terminal 1, the 2 goes to one of the legs of the ecosol, and the remaining wire of the ecosol goes to the neutral, the thermostat is a simple switch, is it understood?

nicolaslk2015

5

hace 5 años

Yes, now! 1 would be the first terminal looking at the photo of the device from left to right, right? Thank you!!

Calemdq

23.097

hace 5 años

yes, if you look closely they are numbered in relief

nicolaslk2015

5

hace 5 años

It was great, thanks !!