⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Heating

IMIT TA2 room thermostat

Compu Gabriel
hace 5 años
hace 5 años
I have this thermostat with the graduation shaft very hard to the point that the white knob is turning false, to turn it I have to remove the white knob and turn the shaft with a clamp. The question is how can I soften the shaft so that it turns without difficulty? Thank you!
Calemdq
Calemdq
23.097
hace 5 años
hace 5 años
Hello If the shaft is hard, it will surely rust, try to soften it with w40 or similar, I will clarify it so that it does not surprise you, when that happens, they rarely look good on the grade scale Cheers !
Compu Gabriel
hace 5 años

If so, I don't know to what degree it is. I put a digital thermometer to the side to see the ambient temperature of the moment, then I turn the shaft with a clamp to see how short or active it is. I know it's not accurate but it's an approximation. If the w40 touches those round plates that are behind, is there no problem?
Thank you.

Responder
Calemdq
Calemdq
23.097
hace 5 años

Nothing happens, it is a lubricant and displaces moisture, it does not hurt

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis