⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Wall boilers

baxi boiler loses pressure

edugues
edugues
128
hace 5 años
hace 5 años
Hello, we bought a department with a Baxi boiler of cold water and heating by 4 radiators, a full service was done and the technician found the bridged pressure switch. It works well but every week the pressure drops and I have no idea where it loses, there is nothing wet, the radiators either. Some similar experience. thanks.-
Calemdq
Calemdq
23.097
hace 5 años
hace 5 años
Hi the expansion vessel should be checked, it may be leaking through the membrane, if it was stopped for a long time that failure is possible. Regards !
edugues
edugues
128
hace 5 años

lose a few drops by the purge of the pump, it seems that the glass does not work as it should, how can I prove it? xq comes out a replace ball, queries;
1st I can prick the lobe with the boiler at 1bar, to see if air comes out alone or with water? Or do I wreck the membrane, if only air comes out, (if water comes out of the glass) what pressure do I put in later with the pressurized boiler or better without pressure? thanks

Responder
Calemdq
Calemdq
23.097
hace 5 años

With the cold boiler just click the lobule, indeed if air comes out it is fine, if water comes out it is punctured and if nothing comes out it lacks air, it is inflated with a manual inflator and carries 1 bar of pressure

Responder
edugues
edugues
128
hace 5 años

First thanks for your help, I pressed the lobe a touch and air comes out. I do not know what happens, when the technician checked the pressure switch bypass, it is seen that this pressure drop comes from before buying this apartment. Full service was done 2 months ago and air was added to the glass. Well, every 30 days or so it downloads. 1º lost a connection, now the purge of the pump (a couple of drops) the service says that it is necessary to replace glass. Greetings

Responder
Lleyiey Sier
hace 5 años
hace 5 años
Hello, I have an installation to make which boiler brand do you recommend if it is not baxi? calefaccionmdp I look for you and I'm looking everywhere, how can I contact you.
Calemdq
Calemdq
23.097
hace 5 años

look in olx, I can not give data x here, greetings!

Responder
Lleyiey Sier
hace 5 años

I will do it

Responder
Lleyiey Sier
hace 5 años

Like I'm looking for you

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis