⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Wall boilers

Roca Victoria 20 20 wall boiler does not pass gas

ersugas

hace 5 años

When I put it to work. Turn on the recirculating pump and the seconds make the sparks there the gas does not come out and in less than 20 seconds it turns off and gives the fault 60 70 90, is the platelet or the gas valve, you can easily test which of these elements can be or there is another inconvenience., thanks.

Comentar



Calemdq

23.097

hace 5 años



hace 5 años

Hi To start, do a good general cleaning, and review of electrical connectors regards !

Comentar

ersugas

hace 5 años

Thanks for the help, I was able to solve the issue by cleaning the connections, it was just that, I almost bought the gas valve ($ 9000) thanks!



Responder

Walter dal farra

7.114

hace 5 años

Hi ERSUGAS: Apart from the recommendations of MDQ, the other day it happened to me that someone closed the gas key of the device and that is why I did not turn it on. another is to measure if it reaches the gas valve LUCK

Comentar

ersugas

hace 5 años

Thanks for the comment, the gas reaches the valve but when not opening the gas does not come to the burner, I will test if it gives tension from the platelet to the valve, because I tested the 4 coils and they work, I continue downstream and I tell you.



Responder

Walter dal farra

7.114

hace 5 años

I did not ignore the tray, I saw if you have any, first in the connector plate and then at the end of the cables, since it is a common fault



Responder

ersugas

hace 5 años

Thanks for the help, clean the electrical connectors of the valve and ripped off.



Responder

ersugas

hace 5 años

It was as simple as disassembling to clean the connectors that come out of the plate and those of the valve and started as usual, thanks to all for the help.

Comentar