buenas tarde tengo un problema con esta maquina y es que no me alimenta los originales desde el ADF , ya le colocamos otro y no sigue igual

por lo general no alimenta papel del adf, porque el scaner esta sucio, opticos o lamparas, primero que todo deves de limpiar bien todo el sistema y de ahi ajustar Main code Sub code Contents Details of function/operation 41 06 OC cover float detection level adjustment [Function] When this simulation is executed, the current set value is displayed. When [ENTER]/[START] key is pressed, the mirror base unit moves to the SPF/RSPF scan position to acquire the OC cover float detection level. When the mirror base unit returns to the home position, the acquired value is displayed. If the adjustment is NG, the following message is displayed. AL-2030/2040CS: Misfeed lamp lights up, and the 7seg display remains unchanged. AL-2050CS: The LCD indicates "ERR." Note that, this simulation must be executed with the OC cover closed. • If the value is 0, float detection is not performed in normal jobs. [Operation] (AL-2050CS only) 1) Initial display <Canceling - when [Clear]/[Clear All] key is pressed-> 41-06 OC FLOAT LEVEL 0 After canceling, the machine goes into the sub code entry standby mode. 2) [ENTER/START] key 41-06 OC FLOAT LEVEL EXECUTING... THE JOB IS BEING CANCELED. 3) When the level is acquired: 41-06 OC FLOAT LEVEL **** OK 3) When the level is not acquired: 41-06 OC FLOAT LEVEL **** ERR

amigos gracias ya solucione este problema gracias a als indicaciones de Yo-REPARO

[quote="tecnico0030"]revisa si detecta el original sino tenes que activarlo por programacion. Suerte[/quote] amigo gracias, ya solucione el problema