hace 5 años
Good morning, I would like to make an electric or electronic circuit to activate the submersible pump without feeding the water tank, I currently have a submersible pump 70 meters deep, an elevated tank tank, a floating interspersed to one of the three Pump cables and a board with a switch and a capacitor that belongs to the pump and is the one that turns the pump on and off. The pump is currently turned on when it detects a drop in the water level of the tank through the float. What I want is with a three-way wrench to cut off the water supply to the tank to enable an external hose and at the same time cut the electrical circuit to the float so that the pump is activated regardless of what the water level and float indicates. I will thank you in advance for the help you can give me. Best regards Jorge
¿Realmente quieres cerrar esta reparación?
Sí
No
¿Realmente quieres reabrir esta reparación?
Sí
No
¿Realmente quieres borrar este post?
Sí
No