⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Electronics and Circuits

Because the main MOSFETs are damaged in a Switched Source

Pixo
Pixo
1.155
hace 5 años
hace 5 años
Why do the main MOSFET transistors usually get cut in a switched source? by bad dissipation or by defective oscillator controller.
GABRIEL MUÑIZ
hace 5 años
hace 5 años
Hi Pixo Transistors in switched sources are damaged by various causes ranging from isolation to the defective heatsink (sometimes they get drilled by the high current they carry), oscillator frequency altered, feedback damaged (altered) and even dirt between their terminals (certain type of dirt becomes conductive). The most remote case is by defective transformer. Regards

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis