Hello! First of all clarify that I am not a registered technician nor do I have much experience. I fell into my hands an LCD or LED TV with problems at the source, since it does not turn on or stand by. I wanted to check if someone can help me. It turns out that the bridge rectifier is short and the fuse is blown. It turns out that the model of the rectifier welded on the plate is KBJ6J from 600v to 6A and the diagram shows another one but with the same characteristics. I have not been able to locate a replacement, but I have two of the same voltage but 4A. Could it be put in parallel leaving 600v at 8A? According to the diagram Afectaria to the plate burning it? And on the other hand, I saw in the diagram that it has two capacitors from 450v to 47uF, (on the board there are two soldiers from 450v to 68uF). It turns out that I have a 450v capacitor at 100uF and notice that in the diagram that the two capacitors are connected in parallel. I thought that if the capacitors are damaged, remove both 68uF and leave a 100uF soldier. I would like if you could confirm me. From already thank you very much