⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Electronics and Circuits

Know the value of a resistance

RUBER965

hace 6 años

best regards folks, there is a resistance with the following colors: green-blue-green-gold-black, to see if someone tells me their value since I have looked in the color code table and virtual calculator, and their values don't match, thanks in advance.

Comentar

Greenmaster

2.849

hace 6 años

5600000 or 5.6 mega ohm



Responder

Carlos Quiroga

1.400

hace 6 años

Hello, I think it reads like this Green 5, Blue 6, Green 5, 565 * 0.1 which is the gold multiplier that is 56.5 times the 1% that is the tolerance of black. Where is the resistance from.



Responder

Ennio Montenegro.

44.317

hace 6 años

Carlos the coffee is 1%.



Responder

Carlos Quiroga

1.400

hace 6 años

Here coffee is expensive, there I send you the table.



Responder

Carlos Quiroga

1.400

hace 6 años

Comentar

Ennio Montenegro.

44.317

hace 6 años

Charles
Interesting the table, because it had 2% Red and 1% brown.
Although it has the error of practically all the tables that is the first band "Black" that says "0" and is not contemplated as first band.



Responder

Carlos Quiroga

1.400

hace 6 años

That does not matter because it is not taken into account since nobody is going to put it in their products.



Responder

JoseOrtiz

1.274

hace 6 años

Is that board okay? I see that it has no division, only a multiplier, according to which I have the value is another ...



Responder

Carlos Quiroga

1.400

hace 6 años

As a division?



Responder

JoseOrtiz

1.274

hace 6 años

According to my table gold is divisor by 10 and silver divisor by 100 in the fourth strip



Responder

Carlos Quiroga

1.400

hace 6 años

No divisors are all multipliers, what is the table?



Responder

JoseOrtiz

1.274

hace 6 años

I already published it below, the value is the same, but there are differences in the interpretation of tolerances



Responder

Carlos Quiroga

1.400

hace 6 años

If it's okay, what happens that dividing by 10 or by 100 is the same as multiplying by 0.1 and 0.01.



Responder



Ennio Montenegro.

44.317

hace 6 años



hace 6 años

The value is 56.5 Ohm. The 5th band is not considered black. But being brown would be 1% tolerance. For you to make your own calculations. https://www.digikey.com/es/resources/conversion-calculators/conversion-calculator-resistor-color-code-5-band

Comentar

RUBER965

hace 6 años

Grateful friends, I had my doubts, but that was the result that gave 56.5 ohms on the virtual calculator, but the black color did not appear. Thank you very much for your contributions.



Responder

Ennio Montenegro.

44.317

hace 6 años

There is no black in tolerance, nor does black as the first band, although in many places it is 0.
Because for that there are the divisors by 10 and 100.



Responder

Greenmaster

2.849

hace 6 años

5600000 or 5.6 mega ohm

Comentar

Ennio Montenegro.

44.317

hace 6 años

Hi greenmaster
The multiplier is 0.1 gold and not 100K green.



Responder

Greenmaster

2.849

hace 6 años

yes, it can be 5.6Mohm if it is 4 colors or 56.6Ohm if it is 5 colors ... but 56.5 Mohm does not add up
It is important to confirm the black line you mention, if it is really a line or it is brown and not black



Responder