⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Electronics and Circuits

IRF9530 Identification

Experimentos

hace 6 años

Good again, because I bought, I need to know if I have made a mistake in the purchase, because I do not know if it's P or N I need like the ones in this picture

and these are the ones I bought but I still have not put https://www.aliexpress.com/item/Free-Shipping-10pcs-lot-IRF9530NPBF-IRF9530N-IRF9530-TO-220-MOSFET-P-100V-14A-New-Original/32649072517.html?spm = a2g0s.9042311.0.0.T0BQKK my opinion is that this is https://www.aliexpress.com/store/product/IRF9530PBF-IRF9530-F9530-100V-12A-TO-220-ROHS-ORIGINAL-20PCS-lot-Free-Shipping-Electronics-composition-kit/316862_32291900856 .html? Spm = 2114.12010615.0.0.5ce5139ePWdZFa

Comentar

Ingnio

2.236

hace 6 años

OK, they are the same electronically, they are physically different in the heatsink because they are of different manufacturer and quality. Greetings.

Comentar

Experimentos

hace 6 años

is that I have looked at pdf and explanations and the difference from an N to a P is the pinning, change the gain by source,
then you say that if I replace it with the one I bought that is npbf there will be no problems?



Responder

Ingnio

2.236

hace 6 años

They have to serve, because if it is the same nomenclature the location of the pins is the same.
You must be confusing the acronyms you mention (npbf) with those of Datasheet pdf of transistors N and P which is the channel: NPN or PNP



Responder

Experimentos

hace 6 años

Okay, so those I bought can use them without problem, right?
thanks mate



Responder



mac22esperando

2.933

hace 6 años



hace 6 años

It is correct that you bought because being power mosfet both and the same channel P you purchased admits 14 continuous amps of current between drain and source and the one you had is 12 amps continuous current therefore if a fully developed channel would pass through development 12 Amperes can now tolerate up to 14 Amps without being damaged.

Comentar